e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING June 2004 © TOSHIBA TEC
5 - 118
[G] Referring to the “FUNCTION LIST FOR MAINTENANCE” list which was printed beforehand, per-
form the re-setting.
(1) Print out the “FUNCTION LIST FOR MAINTENANCE” list after the formatting. (Refer to the pro-
cedure of (2).)
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting.
(4) Turn the power OFF.
[H] Referring to the “FUNCTION” list which was printed beforehand, perform the re-setting of the
default setting of the FAX function.
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
To Next Page
Loading...
