June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 35
6
(6) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item. All items are selected in the default settings.
• Select all items to update the firmware of the equipment in a batch.
• Select items as follows to update it individually.
<Updating System ROM>
Select “0. OS Update”, “1. UI Update”, and “2. System Firmware”.
<Updating Engine ROM>
Select “3. Engine Firmware Update” only.
<Updating Scanner ROM>
Select “4. Scanner Firmware Update” only.
Example: Updating the system ROM
(Updating all the items is taken as an example and explained in the following procedures.)
05/11
To Next Page
Loading...
