e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING June 2004 © TOSHIBA TEC
6 - 86
(6) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
(7) “Update Completed.” is displayed at the bottom of the LCD screen after the updating is com-
pleted properly.
Status display during update Status display when update is completed
OS Update ....... OS Update ....... Completed
HD Data Update ....... HD Data Update ....... Completed
UI Data Update ....... UI Data Update ....... Completed
SysFirm Update ....... SysFirm Update ....... Completed
Engine MAIN Update .. Flash Update Engine MAIN Update .. Completed
Scanner Firm Update.. Flash Update Scanner Firm Update.. Completed
05/11
To Next Page
Loading...
