Toshiba e-STUDIO200L - Page 113

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 77
2
620 Image Sharpness
adjustment
Text/Photo PPC EUR: 1
UC: 1
JPN: 0
<0-99>
SYS When the value
increases, the image
becomes sharper. When
the value decreases, the
image becomes softer.
The smaller the value is,
the less the moire
becomes.
One’s place: Fixed value
(05-620 is “1”, 05-621 is
“2”, 05-622 is “5”)
Ten’s place: Adjustable
from 0 to 9 regarding the
default value as the stan-
dard (The larger the
value is, the sharper the
image becomes.)
* When entering “0” on
the ten's place, this
value is not displayed
on the entry screen.
1
621 Photo PPC 2
<0-99>
SYS 1
622 Text PPC EUR: 45
UC: 45
JPN: 45
<0-99>
SYS 1
648 Image Adjustment of
smudged/faint
text
Text/Photo PPC 2
<0-4>
SYS Adjusts the level of the
smudged/faint text.
With increasing the
value, the faint text is
suppressed, and with
decreasing it, the
smudged text is sup-
pressed.
1
654 Image Adjustment of
smudged/faint
text
PS PRT 5
<0-9>
M Adjustment of the
smudged/faint text.
With decreasing the
value, the faint text is
suppressed, and with
increasing it, the
smudged text is sup-
pressed.
1
655 PCL PRT 5
<0-9>
M1
667-0 Image Density adjustment of cop-
ied image
PPC 0
<0-10>
M Adjusts the density level
of copied image.
When the value
decreases, the text
becomes lighter.
4
667-1 PPC 4
<0-10>
M4
667-2 PPC 5
<0-10>
M4
667-3 PPC 6
<0-10>
M4
667-4 PPC 10
<0-10>
M4
Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
07/11