Toshiba e-STUDIO200L - Page 115

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 79
2
710 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Center value
Photo FAX 128
<0-255>
SYS When the value
increases, the image at
the center step becomes
darker.
1
714 Text/Photo FAX 128
<0-255>
SYS 1
715 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Light step
value
Photo FAX 20
<0-255>
SYS When the value
increases, the image of
the “light” steps becomes
lighter.
1
719 Text/Photo FAX 20
<0-255>
SYS 1
720 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Dark step
value
Photo FAX 20
<0-255>
SYS When the value
increases, the image of
the “dark” steps
becomes darker.
1
724 Text/Photo FAX 20
<0-255>
SYS 1
725 Image Density
adjustment
Fine adjust-
ment of “auto-
matic density”
Photo FAX 128
<0-255>
SYS When the value
increases, the image
becomes darker.
1
729 Text/Photo FAX 128
<0-255>
SYS 1
820 Image Range correc-
tion/Text peak
adjustment
Text/Photo SCN 224
<0-255>
SYS When the value
decreases, the text
becomes darker.
1
821 Text SCN 224
<0-255>
SYS 1
822 Photo SCN 239
<0-255>
SYS 1
825 Image Range correc-
tion on origi-
nal manually
set on the
original glass
Text/Photo SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS Sets whether the values
of the background peak
and text peak are fixed
or not. One’s place is an
adjustment for “auto-
matic density” and ten’s
place is for “manual den-
sity”. Once they are
fixed, the range correc-
tion is performed with
standard values. The
values of the background
peak and text peak affect
the reproduction of the
background density and
text density respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
826 Text SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
827 Photo SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
07/11