e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 80
830 Image Range correc-
tion on origi-
nal set on the
RADF
Text/Photo SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS Sets whether the value
of the background peak
and text peak are fixed
or not. One’s place is an
adjustment for “auto-
matic density” and ten’s
place is for “manual den-
sity”. Once they are
fixed, the range correc-
tion is performed with
standard values.
The values of the back-
ground peak and text
peak affect the reproduc-
tion of the background
density and text density
respectively.
1: fixed/fixed
2: varied/fixed
3: fixed/varied
4: varied/varied
* Background peak/
Text peak
1
831 Text SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
832 Photo SCN 12
<11-14,
21-24,
31-34,
41-44>
SYS 1
835 Image Range correc-
tion/Back-
ground peak
adjustment
Text/Photo SCN 48
<0-255>
SYS When the value
increases, the back-
ground becomes more
brightened.
1
836 Text SCN 48
<0-255>
SYS 1
837 Photo SCN 40
<0-255>
SYS 1
845 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Center value
Text/Photo SCN 128
<0-255>
SYS When the value
increases, the image at
the center step becomes
darker.
1
846 Text SCN 128
<0-255>
SYS 1
847 Photo SCN 128
<0-255>
SYS 1
850 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Light step
value
Text/Photo SCN 20
<0-255>
SYS When the value
increases, the image of
the “light” steps becomes
lighter.
1
851 Text SCN 20
<0-255>
SYS 1
852 Photo SCN 20
<0-255>
SYS 1
855 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Dark step
value
Text/Photo SCN 20
<0-255>
SYS When the value
increases, the image of
the “dark” steps
becomes darker.
1
856 Text SCN 20
<0-255>
SYS 1
857 Photo SCN 20
<0-255>
SYS 1
860 Image Density
adjustment
Fine adjust-
ment of “auto-
matic density”
Text/Photo SCN 128
<0-255>
SYS When the value
increases, the image
becomes darker.
1
861 Text SCN 128
<0-255>
SYS 1
862 Photo SCN 128
<0-255>
SYS 1
Adjustment mode (05) <e-STUDIO202L/203L/232/233/282/283>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
07/11
To Next Page
Loading...
