e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283 © 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
4 - 12
F. Main charger
G. Transfer / Separation charger
H. Drum/Cleaner related section
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
F1 Main charger case
<P25-I1> *f1
F2 Needle electrode 64/74/90 *f1
F3 Contact point of termi-
nals
F4 Main charger wire
cleaner
Δ
<P25-I7>
F5 Main charger grid 64/74/90 <P25-I3>
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
G1 Charger case
<P26-I2> *g1
G2 Transfer charger wire 64/74/90
<P26-I18> *g1
G3 Separation charger
wire
64/74/90
<P26-I18> *g1
G4 Pre-transfer guide
or A
G5 Post-transfer guide
or A
G6 Separation supporter
Δ <P26-I17>
G7 Terminal cover
G8 Contact point of termi-
nals
G9 Transfer guide roller
Δ <P26-I14>
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
H1 Photoconductive drum 64/74/90 Chap.
4.8.2
H2 Discharge LED
H3 Whole cleaner unit
H4 Drum cleaning blade 64/74/90 <P27-I5> *h1
H5 Separation finger for
drum
64/74/90
Δ
*h2
H6 Recovery blade
64/74/90 <P27-I6> *h3
H7 Ozone filter 128/148/180 <P12-I8>