Toshiba e-STUDIO200L - Page 437

© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
PREVENTIVE MAINTENANCE (PM)
4 - 13
4
I. Developer unit / Toner cartridge related section
J. Fuser unit
K. Exit unit
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
I1 Whole developer unit

I2 Developer material 64/74/90 *i1
I3 Front shield

Δ
I4 Oil seal (6 pcs.) AV 320/370/450 <P28-I11> *i2
I5 Guide roller
 or A
I6 Side shield

I7 Developer unit lower
stay

I8 Toner cartridge drive
gear shaft
W1
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
J1 Fuser roller 128/148/180 <P30-I23>
J2 Pressure roller 128/148/180 <P30-I21>
J3 Separation finger for
fuser roller
128/148/180 <P30-I28> *j1
J4 Cleaning roller 128/148/180 <P30-I14>
J5 Fuser unit entrance
guide
A <P30-I39>
J6 Thermistor (3 pcs.) A Δ <P30-I10> *j2
J7 Drive gear
(tooth face and shaft)
W2 Δ <P30-I19>
J8 Fuser roller gear Δ <P30-I24>
Items to check Cleaning Lubrication
Replacement
(x 1,000 sheets)
Operation
check
Parts list
<P-I>
Remarks
K1 Exit/reverse guide A <P31-I21>
K2 Exit roller A Δ <P31-I3>
K3 Drive gear SI
04/09