EasyManuals Logo

Toshiba e-STUDIO206L Troubleshooting Guide

Toshiba e-STUDIO206L
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 21
1 TROUBLESHOOTING FOR THE HARDWARE
Paper jam in the bypass tray
Paper jam in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
2
Check that there is no folded/curled paper or
overloading, and then close the drawer of the Large
Capacity Feeder.
Be sure that the height of the stacked paper does not exceed the
line indicated inside of the side guides.
1
Move the green paper holding lever toward the
outside.
The paper can now be removed.
2
Pull out the jammed paper in the bypass tray.
3
Place paper in the bypass tray again and then move
the green paper holding lever toward the inside.
If a sheet of paper is stained, folded or torn, replace it with a new one.
2
1

Table of Contents

Other manuals for Toshiba e-STUDIO206L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-STUDIO206L and is the answer not in the manual?

Toshiba e-STUDIO206L Specifications

General IconGeneral
BrandToshiba
Modele-STUDIO206L
CategoryAll in One Printer
LanguageEnglish

Related product manuals