Toshiba e-STUDIO206L - Paper Jam in the Saddle Stitch Unit of the Saddle Stitch Finisher MJ-1033 (Optional)

1 TROUBLESHOOTING FOR THE HARDWARE
44 Clearing a Paper Jam
 Paper jam in the Saddle Stitch unit of the Saddle Stitch Finisher MJ-1033 (optional)
8
Close the front cover of the finisher.
1
Remove the paper jammed on the saddle stitch tray in
the lower left part of the finisher.
2
Open the front cover of the finisher.
3
Move the lower green lever to the right and remove
the jammed paper.
4
Return the lever to its original position.
2
1