1 TROUBLESHOOTING FOR THE HARDWARE
40 Clearing a Paper Jam
2
While holding the green lever, move the finisher to the
left until it stops.
3
Pull down the green lever on the right-hand unit of the
finisher.
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and
remove it.
5
Return the green lever to its original position.
6
When the Hole Punch Unit is installed and used for
punching holes, while pulling the green dial toward
you, turn it to align the yellow marks on the parts.
2
1
2
1
2
1
To Next Page
Loading...
