1
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 7
1.3 Options
1.3.1 e-STUDIO200L/230/230L/280/280S
* 1) N: North America E: Europe F: France S: Sweden
Notes:
• The bridge unit (KN-3520) is necessary for installation of the finisher (MJ-1022, MJ-1025).
• The finisher (MJ-1025) is necessary for installation of the hole punch unit (MJ-6005N/E/F/S).
• The PCI slot (GO-1040) is necessary for installation of the scrambler board (GP-1030) and
parallel interface kit (GF-1140).
• GM-1030/GM-2030/GM-3030 are exclusive for e-STUDIO200L.
They do not operate with e-STUDIO230/230L/280/280S.
Platen Cover KA-3511 PC/PC-C
Reversing Automatic Document Feeder (RADF) MR-3016
Drawer Module MY-1021/-C
Paper Feed Pedestal (PFP) KD-1011/-C
Large Capacity Feeder (LCF) KD-1012 A4/LT/A4-C
Finisher (Hanging type) MJ-1022/-C
Saddle stitch Finisher MJ-1025/-C
Hole Punch Unit
MJ-6005 N/E/F/S
*1
Staple Cartridge STAPLE-1600 (for MJ-1022)
STAPLE-2000 (for MJ-1025)
Bridge Kit KN-3520/-C
Job Separator MJ-5004/-C
Offset Tray MJ-5005/-C
Key copy Counter, Key copy counter socket MU-8, MU-10
Work Tray KK-3511
Damp Heater MF-2320 U/E
Fax Board GD-1150 NA/AU/EU/TW/C/AS
2nd Line for Fax Board GD-1160 NA/EU/TW/C
Wireless LAN Adapter GN-1010
PCI Slot GO-1040/C
Scrambler Board GP-1030
Printer Kit GM-1020/GM-1030
Printer/Scanner Kit GM-2020/GM-2030
Scanner upgrade Kit GM-3020/GM-3030
Parallel interface kit GF-1140
Desk MH-1700
Harness kit for coin controller GQ-1020
Automatic Duplexing Unit (ADU) MD-0102
Slot cover KE-2330
NIC board GF-1150
Data overwrite kit GP-1050
05/11
To Next Page
Loading...
