e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT June 2004 © TOSHIBA TEC
3 - 22
3.3.2 Gamma slope adjustment
Gamma slope is adjustable with the following codes.
< Adjustment Mode (05) >
* The values in “( )” are the adjustment codes of the Custom Mode.
<Procedure>
Procedure is same as that of ! P.3-21 "3.3.1 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/Photo Photo Text
593
(943)
594
(945)
595
(944)
Gamma slope adjustment One's place:
0: equivalent to the set value 5
1 to 9: Select the gamma slope
angle. (The larger the value
is, the larger the angle
becomes.)
Ten's place:
0: equivalent to the set value 5
1 to 9: Select the gamma slope angle
of the low density area. (The
smaller the value is, the
darker the background
becomes.)
00: Use default value
To Next Page
Loading...
