June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3 - 31
3
3.5.3 Setting range correction
The values of the background peak / text peak in the range correction can be switched to “varied” or
“fixed” in the following codes.
If they are fixed, the range correction is performed with standard values.
The values of the background peak affect the reproduction of the background density and the values of
the text peak affect that of the text density.
< Adjustment Mode (05) >
<Procedure>
Procedure is same as that of ! P.3-29 "3.5.1 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/Photo Photo Text
825 827 826 Range correction for original
manually set on the original
glass
The following are the default values
set for each original mode.
Text/Photo: 12, Photo: 12, Text: 12
Each digit stands for:
One’s place: Automatic density mode
Ten’s place: Manual density mode
The setting conditions possible are
as follows:
Background peak Text peak
1: fixed fixed
2: varied fixed
3: fixed varied
4: varied varied
830 832 831 Range correction for original
set on the RADF
To Next Page
Loading...
