June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ADJUSTMENT
3 - 23
3
3.3.3 Sharpness adjustment
If you want to make copy images look softer or sharper, perform the following adjustment.
< Adjustment Mode (05) >
* The values in “( )” are the adjustment codes of the Custom Mode.
Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.
<Procedure>
Procedure is same as that of ! P.3-21 "3.3.1 Density adjustment".
Original mode
Item to be adjusted Remarks
Text/Photo Photo Text
620
(922)
621
(924)
622
(923)
Sharpness adjustment Key in the following values depend-
ing on the original mode.
One’s place
1: Text/Photo 2: Photo 5: Text
Ten’s place
0: Use Default value
1 to 9: Change intensity
(The larger the value is, the sharper
the image becomes.)
• Example of value entry in case
the mode is “Text/Photo”.
Note:
Note:
When the value “0” is keyed in
at the ten’s digit, the value is
not displayed on LCD screen.
2 1
Fixed value for Text/
Photo mode
Key in a value 0 to 9
To Next Page
Loading...
