Toshiba e-STUDIO230 - Page 47

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 11
2
2) RFC related error
(when GM-1020/3020, 1030/3030, 2020 or 2030 is installed (e-STUDIO200L/230/280))
(when GM-1070/4070, 1080U/4080U, 2070 or 2080U is installed (e-STUDIO202L/232/282))
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2500 Syntax error, command unrecog-
nized
HOST NAME error (RFC: 500)
Destination mail address error
(RFC: 500)
Terminal mail address error
(RFC: 500)
P. 5-82
2501 Syntax error in parameters or
arguments
HOST NAME error (RFC: 501)
Destination mail address error
(RFC: 501)
Terminal mail address error
(RFC: 501)
P. 5-82
2503 Bad sequence of commands Destination mail address error
(RFC: 503)
P. 5-82
2504 Command parameter not imple-
mented
HOST NAME error (RFC: 504) P. 5-82
2550 Mailbox unavailable Destination mail address error
(RFC: 550)
P. 5-82
2551 User not local Destination mail address error
(RFC: 551)
P. 5-82
2552 Insufficient system storage Terminal/Destination mail address error
(RFC: 552)
P. 5-82
2553 Mailbox name not allowed Destination mail address error
(RFC: 553)
P. 5-82
05/11