June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 13
2
4) E-mail related error
(when GM-1020/3020, 1030/3030, 2020 or 2030 is installed (e-STUDIO200L/230/280))
(when GM-1070/4070, 1080U/4080U, 2070 or 2080U is installed (e-STUDIO202L/232/282))
Error code
Message displayed in the
TopAccess screen
Contents Troubleshooting
2C10 Illegal Job status System access abnormality P. 5-85
2C11 Not enough memory Insufficient memory P. 5-85
2C12 Illegal Job status Message reception error P. 5-85
2C13 Illegal Job status Message transmission error P. 5-85
2C14 Invalid parameter specified Invalid parameter P. 5-85
2C15 Message size exceeded limit or
maximum size
Exceeding file capacity P. 5-85
2C20 Illegal Job status System management module access
abnormality
P. 5-85
2C21 Illegal Job status Job control module access abnormality P. 5-85
2C22 Illegal Job status Job control module access abnormality P. 5-85
2C30 Failed to create directory Directory creation failure P. 5-85
2C31 Failed to create file File creation failure P. 5-85
2C32 Failed to delete file File deletion failure P. 5-85
2C33 Failed to create file File access failure P. 5-85
2C40 Failed to convert image file for-
mat
Image conversion abnormality P. 5-85
2C60 Failed to process your Job. Insuf-
ficient disk space.
HDD full failure during processing P. 5-86
2C61 Failed to read AddressBook Address Book reading failure P. 5-86
2C62 Not enough memory Memory acquiring failure P. 5-85
2C63 Invalid Domain Address Terminal IP address unset P. 5-86
2C64 Invalid Domain Address Terminal mail address unset P. 5-86
2C65 Failed to connect to SMTP server SMTP address unset P. 5-86
2C66 Failed to connect to SMTP server Server time time-out error P. 5-86
2C67 Failed to send E-Mail message NIC time time-out error P. 5-86
2C68 Failed to send E-Mail message NIC access error P. 5-86
2C69 Failed to connect to SMTP server SMTP server connection error P. 5-86
2C6A Failed to send E-Mail message HOST NAME error (No RFC error) P. 5-86
2C6B Invalid address specified in From:
field
Terminal mail address error P. 5-86
2C6C Invalid address specified in To:
field
Destination mail address error (No RFC
error)
P. 5-87
2C6D NIC system error System error P. 5-86
2C70 SMTP service is not available SMTP client OFF P. 5-87
2C71 Failed SMTP Authentication SMTP authentication error P. 5-87
2C72 POP Before SMTP Authentica-
tion Failed
POP before SMTP error P. 5-87
2C80 Failed to process received E-mail
job
E-mail transmission failure when pro-
cessing E-mail job received
P. 5-87
2C81 Failed to process received Fax
job
Process failure of FAX job received P. 5-87
2CC0 Job canceled Job canceling -
2CC1 Power failure occurred Power failure P. 5-87
05/11
To Next Page
Loading...
