e-STUDIO200L/202L/230/232/280/282 TROUBLESHOOTING June 2004 © TOSHIBA TEC
5 - 82
[ 2 ] RFC related error
(when GM-1020/3020, 1030/3030, 2020 or 2030 is installed (e-STUDIO200L/230/280))
(when GM-1070/4070, 1080U/4080U, 2070 or 2080U is installed (e-STUDIO202L/232/282))
[2500] HOST NAME error (RFC: 500) / Destination mail address error (RFC: 500) / Terminal mail
address error (RFC: 500)
[2501] HOST NAME error (RFC: 501) / Destination mail address error (RFC: 501) / Terminal mail
address error (RFC: 501)
Check if the Terminal mail address and Destination mail address are correct.
Check if the mail server is operating properly.
Turn the power OFF and then back ON. Perform the job in error again.
[2503] Destination mail address error (RFC: 503)
[2504] HOST NAME error (RFC: 504)
[2551] Destination mail address error (RFC: 551)
Check if the mail server is operating properly.
Turn the power OFF and then back ON. Perform the job in error again.
If the error still occurs, replace the NIC board.
[2550] Destination mail address error (RFC: 550)
Check the state of the mail box in the mail server.
[2552] Terminal/Destination mail address error (RFC: 552)
Turn the power OFF and then back ON. Perform the job in error again.
If the error still occurs, replace the NIC board.
[2553] Destination mail address error (RFC: 553)
Check if there is an illegal character in the mail box in the mail server.
05/11
To Next Page
Loading...
