June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 47
6
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct (P.6-32 "Fig.6-35").
(2) Turn OFF the power of the equipment.
(3) Take off the right upper cover-1.
Fig.6-44
(4) Take off the right upper cover-2.
Fig.6-45
Right upper cover-1
Right upper cover-2
05/11
To Next Page
Loading...
