e-STUDIO200L/202L/230/232/280/282 REMOTE SERVICE June 2004 © TOSHIBA TEC
8 - 4
- Detailed setting for the order
[ADMIN] > [SERVICE] > [SUPPLY ORDER SETUP] > [TONER ORDERING]
*1 The order is placed when the number of replacement reaches the number specified for the
CONDITION.
- FAX number of this equipment (common information)
[ADMIN] > [FAX] > [TERMINAL ID]
- E-mail information of this equipment (common information)
[ADMIN] > [E-MAIL]
*1 When sending an E-mail, validity of the address is checked. If the address is invalid, it is not
sent.
3) Output of setting list of the Auto Supply Order
Keying in the following buttons and keys prints the setting list.
[USER FUNCTIONS] [USER] [LISTS] [*] [#] [*] [*] [3] [8] [START]
***** TONER ORDER Order information (TONER)
PART NUMBER Part number to be ordered
CONDITION The number of conditions (*1)
QUANTITY The quantity to be ordered
AUTO ORDER ON/OFF setting of order for each part
ID NAME ID name of this equipment
FAX NUMBER FAX number of this equipment
FROM ADDRESS E-mail address of this equipment (*1)
FROM NAME E-mail username of this equipment
To Next Page
Loading...
