June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 37
2
Table 2. Connecting status of additional options at inner area of the equipment
[9]
A Bridge unit/Job Separator/Offset Tray connection detection-
3
Refer to table 2
B Bridge unit/Job Separator/Offset Tray connection detection-
2
Refer to table 2
C Bridge unit/Job Separator/Offset Tray connection detection-
1
Refer to table 2
D - - -
E - - -
F - - -
G - - -
H - - -
[0]
A Dongle (for Printer/Scanner kit (GM-2020 or 2030)) Connectable Not connect-
able
B Dongle (for Printer kit (GM-1020 or 1030)) Connectable Not connect-
able
C Dongle (for Scanner upgrade kit (GM-3020 or 3030)) Connectable Not connect-
able
D Dongles for other equipments/Other USB devices Connectable Not connect-
able
E - - -
F - - -
G - - -
H - - -
Bridge unit Job Separator Offset Tray None
Bridge unit/Job Separator/Offset Tray
connection detection-3
Normal display Highlighting
display
Highlighting
display
Highlighting
display
Bridge unit/Job Separator/Offset Tray
connection detection-2
Highlighting
display
Highlighting
display
Normal display Highlighting
display
Bridge unit/Job Separator/Offset Tray
connection detection-1
Normal display Normal display Normal display Highlighting
display
Digital
key
Button Items to check
Contents
Highlighted
display
e.g.
Normal dis-
play
e.g.
05/11
To Next Page
Loading...
