3 RECEIVING A FAX
50 Originals and Paper
Setting a Fax drawer
A drawer exclusive for fax can be set for Fax reception. In this setting, only the paper in the Fax
drawer is used for printing received data.
When the incoming original is larger than the recording paper, it is printed according to the
setting of "RXPRINT - REDUCTION" or "RXPRINT - DISCARD".
P.47 “Default setting for RX printing”
1
Press [USER FUNCTIONS].
2
Press , , , or to select [FAX] [RX PRINT], and then press .
3
Press or to select [FAX DRAWER SETTING], and then press .
4
Select the desired Fax drawer using or and press [OK].
To clear the setting, select [OFF] (default value).
USER FUNCTIONS
GENERAL
COPY
SCAN
FAX
TERMINAL ID
INITIAL SETUP
RX PRINT
RX PRINT
FAX DRAWER SETTING
DISCARD
REDUCTION
FAX DRAWER SETTING
OFF
DRAWER1
DRAWER2
To Next Page
Loading...
