Toshiba e-studio2505f - Character Entry; Switching the Input Mode; Entering Characters

6 SETTING ITEMS
96 Character Entry
Character Entry
The Character Entry screen is for entering characters when you are setting and entering items.
You can enter the following:
Alphabet characters, numbers and symbols.
Enter the characters using the digital keys and , , , or , after switching the type of the
character with the [ ] digital key.
 Switching the input mode
The type of the character is displayed in the first line of the message display panel. Set the type
of character to enter by pressing the [ ] digital key.
The input mode switches as follows each time the [ ] key is pressed.
Alphabet characters <--> Numbers
 Entering characters
Example: To enter “Chicago”
1
Press [ ] to set the alphabet input mode.
2
Press [2] a few times to enter “C”.
3
Press to move the cursor to the right.
If you want to enter a character assigned to another digital key, you can enter it
without moving the cursor to the right or pressing .
SINGLE 001
ENTER NAME(MAX20)
:Aa
_
:Aa
C
SINGLE 001
ENTER NAME(MAX20)
SINGLE 001
ENTER NAME(MAX20)
:Aa
C_