1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 37
1 TROUBLESHOOTING FOR THE HARDWARE
Paper misfeed in the Inner Finisher and the Hole Punch Unit
22
Close the front cover of the finisher.
1
Lift up the control panel and then open the front cover
of the finisher.
2
While holding the green lever, move the finisher to the
left until it stops.
3
Pull down the green lever on the right-hand unit of the
finisher.
The paper exit of the equipment opens.
4
Turn the green dial clockwise to send the paper and
remove it.
2
1