1 TROUBLESHOOTING FOR THE HARDWARE
46 Clearing a Staple Jam
8
Close the front cover of the finisher.
Inner Finisher
5
Holding the knob, raise the guide, and return it to its
original position.
6
Remove the staples fallen between the staple
cartridge and the staple case or the ones in the staple
receiver.
7
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
1
Lift up the control panel and then open the front cover
of the finisher.
2
1
To Next Page
Loading...
Need help?
General
