Toshiba E-studio2555cse Troubleshooting Guide

1. TROUBLESHOOTING FOR THE HARDWARE
This chapter describes how to troubleshoot problems with paper, toner and other finishing processes.
This chapter also describes how to supply the paper, toner and staples.
When This Screen Is Displayed..............................................................................................8
Messages Displayed on the Touch Panel ............................................................................10
Clearing a Paper Misfeed.......................................................................................................14
Locating a paper misfeed.....................................................................................................................................14
Clearing a paper misfeed .....................................................................................................................................15
Paper misfeed in the Reversing Automatic Document Feeder (Lower) ...............................................................16
Paper misfeed in the Reversing Automatic Document Feeder (Upper) ...............................................................17
Paper misfeed in the drawer feeding portion........................................................................................................18
Paper misfeed in the Large Capacity Feeder.......................................................................................................19
Paper misfeed in the Paper Feed Pedestal..........................................................................................................19
Paper misfeed in the drawer ................................................................................................................................20
Paper misfeed in the drawer of the Large Capacity Feeder.................................................................................20
Paper misfeed in the bypass tray .........................................................................................................................21
Paper misfeed in the automatic duplexing unit.....................................................................................................22
Paper misfeed on the paper transport path..........................................................................................................23
Paper misfeed in the fuser unit.............................................................................................................................23
Paper misfeed in the Bridge Kit............................................................................................................................25
Paper misfeed in the Finisher and the Hole Punch Unit.......................................................................................25
Paper misfeed in the Saddle Stitch Finisher and the Hole Punch Unit.................................................................29
Paper misfeed in the Saddle Stitch unit of the Saddle Stitch Finisher..................................................................32
Paper misfeed in the Inner Finisher and the Hole Punch Unit .............................................................................37
Clearing paper misfeeds caused by a wrong paper size setting ..........................................................................40
Clearing a Staple Jam............................................................................................................45
Staple jam in the finisher ......................................................................................................................................45
Staple jam in the Saddle Stitch unit ......................................................................................................................49
Replacing a Toner Cartridge .................................................................................................51
Replacing a “Near Empty” toner cartridge............................................................................................................54
Replacing the Waste Toner Box............................................................................................57
Refilling With Staples.............................................................................................................59
Refilling finisher staples........................................................................................................................................59
Refilling Saddle Stitch unit staples........................................................................................................................62
Cleaning the Main Chargers and LED Print Heads.............................................................65
Cleaning the Hole Punch Dust Bin.......................................................................................68
Finisher / Saddle Stitch Finisher Hole Punch Unit................................................................................................68
Inner Finisher Hole Punch Unit ............................................................................................................................68
When Printed Sheets Overflow from the Exit Tray..............................................................70

Toshiba E-studio2555cse Specifications

General

Brand	Toshiba
Model	E-studio2555cse
Category	All in One Printer
Language	English