Toshiba e-STUDIO287CS - Edge Erase

EDITING FUNCTIONS
- 100 -
2
1
3
4
5
6
7
4
Press [OK].
Edge Erase
You can whiten the edge of the copied image when a shadow-
like dark part appears on it. This function is called “edge
erase”. It is useful when you want to make the copied image
neat and clear if the edge of the original is dirty or torn.
Memo
• Only standard size originals are applicable.
1
Place paper in the drawer(s).
When using bypass copying, be sure to set the paper
size.
2
Place the original(s).
3
Press [EDGE ERASE] on the EDIT menu.
4
Adjust the width of the part to be erased.
1) Press either [ 2 mm] (0.08") or [ 50 mm]
(1.97").
2) Press [OK].
5
Select other copy modes as required, and
then press the [START] button on the
control panel.