Toshiba e-Studio332s - Printing from USB Memory; Starting a Print Job

Printing From USB Memory
-119-
Using as a Printer
5
z Printing From USB Memory
This section explains how to print from the USB memory. Inserting the USB memory into the machine,
you can print documents stored in it directly.
Note
z Not all USB memory products are guaranteed to work. (USB memory with security functions is not supported.)
z USB hubs and external USB HDDs are not supported.
z Encrypted PDF is not supported.
Memo
z The following file systems are supported: FAT12, FAT16, FAT32.
z The following file formats are supported: JPEG, PDF (v1.7), M-TIFF (v6 Baseline), PRN (PCL, PS).
z Up to 32 GB capacity of USB memory is supported.
z Up to 100 files in supported file formats stored in USB memory are displayed on the file list.
- If more files are stored in USB memory, the list of the stored files may not be displayed properly.
- USB memory with a directory structure of 20 or more levels may not be read properly.
- Files path exceeding 240 characters may not be read correctly.
z You can select and print one file in your USB memory at a time.
Starting a Print Job
1 Insert the USB memory into the USB
port on the machine.
Note
z Insert the USB memory straight into the USB port. If
the USB memory is inserted at an angle, it may
damage the USB port.
2 Press the <PRINT> key on the operator
panel to open the print menu.
3 Press the to select the [Print From
USB Memory] and then press .
4 Check that [Select Print File] is
selected and then press .
If a file to be printed is not stored in the folder,
proceed to step 7.
5 Press the to select the folder with the
file to print in it and then press .
6 Press the to select [Open folder.] and
then press .
Repeat step 5 and 6 until the file to print is
displayed.
Memo
z If [Folder Property] is selected, you can check the
folder information.
7 Press the to print a file and then
press .
8 Press the to select [Select a file] and
then press .
Memo
z If [File Property] is selected, you can check the file
information.
9 Perform print settings if necessary.
Reference
z "Configuring Print Settings" on P. 120
10 Press to start printing.
OK
OK
OK
OK
OK
OK
MONO