Toshiba e-Studio332s - Changing Image Orientation of Document (Direction); Making Enlarged or Reduced Copies (Zoom)

Configuring Copy Settings
-79-
Copying
2
Changing Image Orientation
of Document (Direction)
You can select [Portrait] or [Landscape] for the
document's orientation. Specify an appropriate
orientation to get the copy result you want.
Reference
z For details on how to load documents in each orientation,
refer to "Loading Documents" P. 42.
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Direction] and
then press .
3 Press the to select the orientation of a
document and then press .
4 Press the until the start screen is
displayed.
Making Enlarged or Reduced
Copies (Zoom)
You can make enlarged or reduced copies by
setting [Zoom]. You can set the zoom ratio in
the following three ways:
z Using [Auto]
z Selecting a preset zoom ratio
z Setting the zoom ratio using the ten-key pad
Using [Auto]
By selecting [Auto], the zoom ratio is
automatically determined according to the
selected scan size and paper tray.
Note
z You can use [Auto] only when copying on A4, A5, A6, B5
letter, legal 13/13.5/14, and executive paper.
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Zoom] and then
press .
3 Press the to select [Auto] and then
press .
4 Press the until the start screen is
displayed.
Memo
z Setting the [Paper Tray] to [Automatic] will
automatically set [Enlarge/Reduce] to [100%]. When
selecting another scaling factor, initially set [Paper Tray],
and then set [Enlarge/Reduce].
Selecting a Preset Zoom Ratio
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Zoom] and then
press .
3 Press the to select the desired value
and then press .
Memo
z By selecting [Fit to page(98%)], if the sizes of the
document and the paper are the same, the document
is reduced to fit onto the paper.
4 Press the until the start screen is
displayed.
Note
z When [Paper Feed] is set to [Auto], some values cannot
be selected. The selectable values differ according to the
selected scan size.
z With some ratios, parts of the document's image may be
missing or margins may appear on the copied outputs.
Memo
z When [Paper Feed] is set to [Auto], the paper tray is
automatically selected according to the selected zoom
ratio. If you want to use a specific paper tray, reconfigure
the [Paper Feed] setting.
z A paper tray that holds paper other than A4, B5, A5, A6,
letter, legal 13/13.5/14, or executive is not selected even if
[Paper Feed] is set to [Auto]. To select the desired paper
tray, reconfigure the [Paper Feed] setting.
Setting the Zoom Ratio Using the
ten-key pad
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Zoom] and then
press .
3 Press the to select [Zoom
(25~400%)] and then press .
Settable Values:
Portrait* Landscape
*indicates the factory default.
OK
OK
OK
OK
Values:
100%* A4->A5(70%)
Leg14->Let(78%) Leg13.5->Let(81%)
Leg13->Let(84%) A4->B5(86%)
A4->Let(94%) Let->A4(97%)
Fit to page(98%) B5->A4(115%)
A5->A4(141%)
*indicates the factory default.
OK
OK
OK
OK