Toshiba e-STUDIO350 - Page 260

e-STUDIO350/352/353/450/452/453 © 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 240
Feed roller
(Bypass unit)
1324-0,1,2,8 1325 <Default values of code 1324
(e-STUDIO352/353/452/453)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80000/80000
Pickup roller
(PFP upper drawer)
1328-0,1,2,8 1329 <Default values of code 1328
(e-STUDIO352/353/452/453)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80000/80000
Pickup roller
(PFP lower drawer)
1330-0,1,2,8 1331 <Default values of code 1330
(e-STUDIO352/353/452/453)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80000/80000
Pickup roller
(Bypass unit)
1332-0, 1, 2, 8 1333 <Default values of code 1332
(e-STUDIO352/353/452/453)>
Sub-codes 0, 2, 8: 0/0
Sub-code 1: 80000/80000
Items
PM management set-
ting <Procedure 4>
*Indicated in 8 digits
Date of previous
replacement
<Procedure 2>
Remarks
07/11