© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6 - 17
6
[C] Display during the update
The processing status is displayed as follows on the LCD screen during the update. (As an example,
the display for updating the system ROM is explained below.)
Press [START] button after selecting the item
to be updated. The device check starts.
When the device check completes, erasing the
data in the ROM of the equipment starts.
Turn ON the power while [8] button and [9] button are pressed simultaneously.
To Next Page
Loading...
