Toshiba e-STUDIO350 - Page 631

© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
FIRMWARE UPDATING
6 - 55
6
<Updating Scanner ROM>
(1) Install the ROM to the download jig.
Make sure the direction is correct (P. 6-35 "Fig. 6-29").
(2) Shut down the equipment.
(3) Take off the right upper cover.
Fig. 6-50
(4) Remove the cover plate.
Fig. 6-51
Right upper cover
Cover plate
05/11