© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO350/352/353/450/452/453
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 145
2
Procedure 5
* Press [HELP] to enter "-".
Procedure 7
Procedure 9
Procedure 10
Procedure 11 and 12
*1 Press [MONITOR/PAUSE] to enter "-", when entering telephone number.
*2 The data are stored in SYS-RAM in procedure 11 and stored in NIC-RAM in procedure 12.
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
*[HELP]
[START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
(Stores value in RAM)
Sets or
changes value
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Setting)
[CLEAR]
(Corrects value)
[START]
(HDD formatting)
[CANCEL]
[ENTER]
or
[INTERRUPT]
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Select icon]
[START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(1st setting)
[Digital key]
(2nd setting)
[START] [START]
[CANCEL]
[ENTER]
or
[INTERRUPT]
[CLEAR]
(Corrects value)
[CLEAR]
(Corrects value)
(Stores value in RAM)
[0][8]
[POWER]
[POWER] OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
or
[Software keyboard]
[START]
[CANCEL]
[CLEAR]
(Corrects value)
*2
(Stores value in RAM)
*1
[MONITOR/PAUSE]
Sets or
changes value
[ENTER]
05/12
To Next Page
Loading...
