Toshiba E-studio3555c Management Guide

2 SETTING ITEMS (ADMIN)
122 802.1X SETTINGS
802.1X SETTINGS
You can make settings for IEEE 802.1X authentication that will apply to wired networks.
This equipment supports the following authentication methods:
 EAP-MSCHAPv2
 EAP-MD5
 EAP-TLS
 PEAP
*1
The following protocols are available for inner authentication:
- EAP-MSCHAPv2
 EAP-TTLS
The following protocols are available for inner authentication:
-PAP
-CHAP
- EAP-MSCHAPv2
- EAP-MD5
*1 PEAP is not available for Windows Server 2008.
To enable IEEE 802.1X authentication, you must install certificates in this equipment as required, using TopAccess. The
certificates that must be installed are as follows.
*1 The CA certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are performed.
*2 The user certificate must be installed in this equipment before the settings for IEEE 802.1X authentication are performed.
 For instructions on how to install certificates, refer to the TopAccess Guide “Chapter 8: [Administration] Tab
Page”.
 For instructions on how to display the WIRED 802.1X SETTINGS screen, see the following page:
 P.47 “Accessing the Admin Menu”
Authentication Method Inner Authentication Method CA Certificate User Certificate
EAP-MSCHAPv2 - - -
EAP-MD5 - - -
EAP-TLS -
Necessary
*1
Necessary
*2
PEAP EAP-MSCHAPv2
Necessary
*1
-
EAP-TTLS PAP
Necessary
*1
-
CHAP
Necessary
*1
-
EAP-MD5
Necessary
*1
-
EAP-MSCHAPv2
Necessary
*1
-

Toshiba E-studio3555c Specifications

General

Brand	Toshiba
Model	E-studio3555c
Category	All in One Printer
Language	English