2 SETTING ITEMS (ADMIN)
96 COPY
COPY
You can change the system behavior for copy jobs, such as the maximum number of copies, auto 2-sided mode, and the
sort mode priority.
For instructions on how to display the COPY screen, see the following page:
P.47 “Accessing the Admin Menu”
The screen is composed of multiple pages. Press or to navigate back and forth through the pages.
COPY screen (1/3)
*1 This option may be unavailable depending on the model.
COPY screen (2/3)
* Paper feeding when the drawer becomes empty during a copy job is as follows:
This is an example when the drawer for feeding paper is automatically changed while data is being copied on A4-size paper.
Item name Description
MAXIMUM COPIES
Press the button of the desired maximum number of copies to be allowed from [9999]
*1
, [999], [99],
and [9].
AUTO 2-SIDE MODE Press the button of the 2-sided mode copy settings (Available only when the Automatic Duplexing Unit
is installed) that applies by default to originals placed in the Reversing Automatic Document Feeder.
OFF — Press this button to set the 2-sided mode to [1->1 SIMPLEX].
1->2 DUPLEX — Press this button to set the 2-sided mode to [1->2 DUPLEX].
2->2 DUPLEX — Press this button to set the 2-sided mode to [2->2 DUPLEX].
USER — Press this button to automatically display the screen to select the 2-sided mode when
originals are placed in the Reversing Automatic Document Feeder.
SORT MODE PRIORITY Select the default sort mode for copy jobs. If [STAPLE] is selected, the output is stapled on the upper
left corner by default. To staple copies, the finisher must be installed.
Item name Description
AUTOMATIC CHANGE
OF PAPER SOURCE
This option allows you to specify whether to enable the function to automatically change the paper
source also when the paper source has been manually specified for a copy job.
Selecting [ON] makes the equipment feed the same size of paper from a different drawer when the
specified drawer becomes empty during a copy job.
When ATTRIBUTE is set to other than [NONE] for a drawer, the paper placed in this drawer is out
of the scope of the Automatic Change of Paper Source function.
For instructions on how to check and/or change attribute for a drawer, see the following page:
P.18 “DRAWER”
PAPER OF DIFFERENT
DIRECTION
*
Selecting [ON] makes the equipment feed the same size of paper with different orientation from a
different drawer when the specified drawer becomes empty during a copy job.
SUSPEND PRINTING IF
STAPLER EMPTY
This option allows you to select whether to stop printing when the stapler is empty during stapling in
other than the saddle stitch mode.
ON — Press this button to stop printing.
OFF — Press this button to continue printing without stapling.
If the stapler is empty in the saddle stitch mode, printing stops.
DEFAULT MODE OF
AUTO COLOR
A setting item for color models. It allows you to specify the initial mode for the Auto Color Copy mode.
Options Paper Feeding
AUTOMATIC CHANGE OF
PAPER SOURCE
PAPER OF DIFFERENT
DIRECTION
With Automatic Paper
Selection (APS)
With drawer specified
manually
ON ON A4 and A4-R paper are fed. A4 and A4-R paper are fed.
ON OFF A4 paper is fed. A4 paper is fed.
OFF ON
OFF OFF
To Next Page
Loading...
Need help?
General
