2 SETTING ITEMS (ADMIN)
124 802.1X SETTINGS
3
Select the inner authentication method and press [Next].
Selecting inner authentication method is necessary only when you selected [PEAP] or [EAP-TTLS] in step 3.
4
Specify the following items as required and press [Next].
When you press [EAP USER NAME], [PASSWORD], or [RETYPE PASSWORD], the on-screen keyboard is
displayed.
For details of the on-screen keyboard, see the following page:
P.154 “On-screen keyboard”
When you selected [PEAP]: When you selected [EAP-TTLS]:
When you selected other than [EAP-TLS]: When you selected [EAP-TLS]:
Item name Description
EAP USER NAME Press this button to enter the EAP user name.
PASSWORD Press this button to enter the authentication password.
RETYPE PASSWORD Press this button to enter the authentication password again.
Use Username from Common Name
in the User Certificate
To set the common name in the user certificate installed in this equipment as EAP user
name, press [ENABLE].
If you set this item to [ENABLE], you will not be able to enter [EAP USER NAME].
To Next Page
Loading...
Need help?
General
