2 SETTING ITEMS (ADMIN)
68 GENERAL
5
Select the file that you want to install, and press [INSTALL].
The installation confirmation screen is displayed.
6
Press [YES].
The installation begins.
Do not remove the USB storage device until the data transfer is complete. Removing the device while data
are being transferred could destroy them or cause a malfunction of the equipment.
Pressing [YES] in the above screen while jobs are being processed, displays the message “Process cannot
be performed while Job is processing or Admin function is in progress.” in the CAUTION screen. In this
case, press [CLOSE], and wait until the job is complete, then perform the operation again.
7
When the installation is complete, remove the USB storage device from the USB port
on the equipment, and press [OK] to reboot the equipment.
Your system is now updated. When update is complete, the equipment is automatically rebooted.
To Next Page
Loading...
Need help?
General
