Toshiba E-studio3555c High Security Mode Management Guide

3 THE INITIAL VALUES
18 Precautions on the Initial Values
[Printer] Sub Menu
[Print Service] Sub Menu
[ODCA] Sub Menu
[Security] Menu
[Authentication] Sub Menu
Item
Initial value for the high
security mode
Remarks
General Setting
Restriction for Print
Job
Only Hold
Item
Initial value for the high
security mode
Remarks
IPP Print
Enable SSL Enable
FTP Print
Enable FTP Printing Disable
Raw TCP Print
Enable Raw TCP Enable Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
LPD Print
Enable LPD Enable Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Item
Initial value for the high
security mode
Remarks
Network
Enable Port Disable
Item
Initial value for the high
security mode
Remarks
User Authentication Setting
User Authentication Enable You cannot change the setting to "Disable".
Authentication Type MFP Local
Authentication
Enable Guest User No check mark (Disable) The initial value is the same as in the Normal
Security Mode; however, it cannot be set to
"Enable".
PIN Code Authentication Disable Do not change the setting to “Enable”.
Use Password
Authentication for Print
Job
Disable Do not change the setting to “Enable”.

Toshiba E-studio3555c Specifications

General

Brand	Toshiba
Model	E-studio3555c
Category	All in One Printer
Language	English