1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Misfeed 31
TROUBLESHOOTING FOR THE HARDWARE
Misfeed when printing from the Fax
1
Pull out the drawer in which paper misfeeds occurred and remove all the paper from it.
If such paper misfeeds occur although [Auto] has been selected as the paper size, this is caused by the incorrect
size detection of the paper placed in the drawer. In this case, do not remove the paper and proceed to step 3.
2
Place the paper corresponding to the set size in the drawer.
3
Check that the guide width is correct and there is no folded/curled paper or overloading, and
then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside of the side guides.
4
Clear the paper misfeed following the guidance shown on the touch panel. Then close all the
drawers and covers.
Printing resumes.
To Next Page
Loading...
