2.PRINTING FROM WINDOWS
Printing With Best Functions for Your Needs 107
2 PRINTING FROM WINDOWS
3
When printing a document, display the [Basic] tab menu of the printer driver
properties, select the document size in the [Original Paper Size] box and either [Letter
Tab] or [A4 Tab] (according to the document size) in the [Print Paper Size] box.
The [Primary Tab Dialog] dialog box appears.
4
In the [Tab Manufacturer] box, select the product name of the tab paper that you use, or
select [Custom] when you use other manufactured tab paper.
5
When you select [Custom] in the [Tab Manufacturer] option, enter the width of the tab
extension in the [Tab Extension] box.
6
Enter the width to shift the printed image in the [Image Shift Width] box.
If you created a document as described in Step 1, enter the width of the tab extension here.
The 0.17 inch or 4.2 mm margin on the right side of the paper is not a printable area. Therefore, be sure to enter
the image shift margin so that an image will be printed within the printable area.
7
Click [OK].
8
Set any other print options you require and click [OK].
9
Click [OK] or [Print] to send the print job.
10
Press [JOB STATUS] on the touch panel.
The print job list appears.
11
Select the desired job in the print job list and then press the [START] button on the
control panel.
y The print job is printed on the tab paper.
y For the detailed instructions on how to use the control panel, see the following page:
P.178 “Monitoring the Print Job Status”
To Next Page
Loading...
