2.PRINTING FROM WINDOWS
Setting Up Print Options 67
2 PRINTING FROM WINDOWS
[Device Settings] tab
The [Device Settings] tab allows you to configure options. When any optional unit is installed in this equipment, set the
configuration of the machine on this tab. The [Device Settings] tab can be displayed only from the Printers folder (and not
when displaying the properties from the application’s print dialog box).
In order to set the [Device Settings] tab, you must access the printer driver properties from the [Devices and Printers]
folder (Windows Vista / Windows Server 2008: [Printer], Windows XP / Windows Server 2003: [Printers and Faxes]).
For detailed instructions on how to set the [Device Settings] tab, see the following page:
P.13 “Configuring options manually”
1) Model Selection
This sets the model type.
If you select [Universal], you can narrow down the setup items of the printer driver to those used commonly in all of
the entire e-STUDIO Series. It is convenient in such cases as when you are using a printer driver already installed
to other e-STUDIO Series models.
2) Option
This option sets whether the following optional devices are installed.
Drawers
This sets the installation of drawers according to the configuration.
- Drawer1 — Select this when only Drawer 1 is installed.
- Drawer 1 & LCF — Select this when Drawer 1 and the LCF (optional) are installed.
- Drawer 1 & Drawer 3 — Select this when Drawers 1 and 3 are installed.
- Drawer 1 & Drawer 3, 4 — Select this when Drawers 1, 3 and 4 are installed.
- Drawer 1 & Drawer 2 — Select this when Drawers 1 and 2 are installed.
- Drawer 1, 2 & Drawer 3 — Select this when Drawers 1, 2 and 3 are installed.
- Drawer 1, 2 & Drawer 3, 4 — Select this when Drawers 1, 2, 3 and 4 are installed.
- Drawer 1, 2 & LCF — Select this when Drawers 1, 2 and the LCF are installed.
The Large Capacity Feeder (optional) is not available for some countries or regions.
1
3
2
4
11
5
8
6
7
10
9
12
To Next Page
Loading...
