EasyManua.ls Logo

Toshiba e-STUDIO400P - Toner Save; Booklet Modes

Toshiba e-STUDIO400P
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.PRINTING FROM UNIX/Linux
Printing From Application 169
4 PRINTING FROM UNIX/Linux
Toner Save
The toner save mode can be set using the following option.
Example: The command to set the toner save mode is “lp -o tonersave=on <filename>”.
Booklet Modes
The booklet mode can be selected using the following options.
The booklet mode applies only for the PostScript data. Performing the booklet printing using the PCL data is invalid.
In a job, if this value is LT, and in PDL too the data are for LT paper size, this will result in a scaled booklet on Letter paper.
In a job, if this value is A3, and in PDL the data are for A4 paper size, this will result in a tiled booklet on A3 paper.
When the Booklet Mode options is selected, the paper size is automatically set to the same size as for Booklet Mode. This
function is only available for A3, A4, B4, Letter and Ledger paper sizes.
If the booklet mode is selected, then duplexing is also selected automatically (sduplex). Setting duplexing separately can
override the booklet mode setting for duplexing.
Example: The command to select Letter size paper for the booklet printing mode is “lp –o booklet=letter <filename>”.
Option Value Alternate Value Description
tonersave=on ON Set the toner save mode.
tonersave=off OFF Cancel the toner save mode.
Option Value Alternate Value Description
booklet=letter lt
LT
Select Letter size paper for the booklet printing mode.
booklet=A4 a4 Select A4 size paper for the booklet printing mode.
booklet=legal lg
LG
Select Legal size paper for the booklet printing mode.
booklet=
statement
st
ST
Select Statement size paper for the booklet printing
mode.
booklet=ledger ld
LD
Select Ledger size paper for the booklet printing mode.
booklet=folio folio-japan Select Folio size paper for the booklet printing mode.
booklet=A3 a3 Select A3 size paper for the booklet printing mode.
booklet=A5 a5 Select A5 size paper for the booklet printing mode.
booklet=B4 b4
B4-JIS
b4-jis
Select JIS B4 size paper for the booklet printing mode.
booklet=B5 b5
B5-JIS
b5-jis
Select JIS B5 size paper for the booklet printing mode.
booklet=
computer
co
CO
Select Computer size paper for the booklet printing
mode.
booklet=legal13 lg13
LG13
Select Legal-13 size paper for the booklet printing
mode.
booklet=SQ85 sq85
letter-square
Select 8.5 inch square size paper for the booklet
printing mode.
booklet=8K 8k Select 8K size paper for the booklet printing mode.
booklet=16K 16k Select 16K size paper for the booklet printing mode.

Table of Contents

Other manuals for Toshiba e-STUDIO400P

Related product manuals