2.PRINTING FROM WINDOWS
Printing With Best Functions for Your Needs 109
2 PRINTING FROM WINDOWS
Inserting from the bypass tray
When the paper is being fed into the equipment
y Do not mix paper of different sizes.
y Place one sheet at a time on the bypass tray even if you wish to print multiple copies.
y Slightly curl the paper. Hold it gently as it is being fed into the equipment.
y Be careful not to cut your fingers on the edge of paper when you hold it.
y Make sure that the trailing edge of the paper will not be fed into the equipment while you are holding it.
y The paper will be printed with a resolution of 300 dpi.
When the paper is coming out of the equipment
y Hold the paper gently as it is coming out of the equipment.
y Be careful not to cut your fingers on the edge of paper when you hold it.
y Do not pull out the paper forcibly as it is exiting from the equipment.
To Next Page
Loading...
