3.PRINTING FROM Macintosh
Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.6.x 153
3 PRINTING FROM Macintosh
Color Settings 4 6
In the Color Settings 4 6, you can set image attributes for printing.
1) Background Adjustment
Adjusts the density level of the background. You can set from -4 (lightest) to 4 (darkest).
Finishing
In the Finishing menu, you can set the destination, hole punching and stapling.
1) Destination
This selects the destination tray.
- Printer’s Default — Select this to route the output to the default tray (that is set as the default tray for raw jobs in
the Printer setting page of the TopAccess Administrator’s page).
- Exit Tray — Select this to set the output to the exit tray of this equipment.
- Upper Exit Tray — Select this to set the output to the upper exit tray of this equipment.
- Side Exit Tray — Select this to set the output to the side exit tray of this equipment.
- Tray 1 — Select this to set the output to the upper tray of the Finisher (optional).
- Tray 2 — Select this to set the output to the lower tray of the Finisher (optional).
y Destinations selectable differ depending on the model and the option configuration.
y Depending on the type of Finisher (optional) installed and destination settings, stapling and hole punching may
not be performed.
y Depending on the equipment settings, the paper may be delivered to a tray that cannot carry out stapling or
hole punching when [Printer’s Default] is selected as the [Destination] option.
y [Tray 1] and [Tray 2] can be enabled when the Finisher (optional) or Saddle Stitch Finisher (optional) is
installed.
y [Side Exit Tray] can be enabled only when neither of the Finisher (optional) and the Saddle Stitch Finisher
(optional) is installed.
1
1
2
3
4
To Next Page
Loading...
