2 PRINTING FROM WINDOWS
14 Before Using the Printer Driver
3
Display the [Device Settings] tab menu, and set the following options.
Model Selection — This sets the model type. The setup items of the printer driver are changed according to the
model selected.
If you select [Universal], you can narrow down the setup items of the printer driver to those used commonly in
all of the e-STUDIO Series. It is convenient in such cases as when you are using a printer driver already
installed to other e-STUDIO Series models.
Option — This option sets whether the following optional devices are installed.
y Drawers — This sets whether the optional drawers or the Large Capacity Feeder (optional) (not available for
some countries or regions) are installed.
y Finisher — This sets whether or not the Finisher (optional) is installed.
y Hole Punch Unit — This sets whether or not the Hole Punch Unit (optional) is installed.
y External LCF — This sets whether or not the External Large Capacity Feeder (optional) is installed.
y Inserter Unit — This sets whether or not the Inserter Unit (optional) is installed.
The Large Capacity Feeder (optional) is not available for some countries or regions.
y Setup items differ depending on the model and the option configuration.
y For more information about each item, see the descriptions about the [Device Settings] tab.
P.67 “[Device Settings] tab”
4
Click [Drawer Settings].
The [Drawer Settings] dialog box appears.
To Next Page
Loading...
