5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
192 Monitoring the Print Job Status
Printing Hold Print jobs
Follow the procedure below to process your Hold Print jobs from the control panel.
1
On the Hold Print job list ( P.190), select a job for printing. You can select more than
one job.
y If the target job is not displayed on the screen, use and to change between pages.
y If you want to select all the jobs displayed on the screen, press [SELECT ALL]. To cancel the selection, press
[ALL CLEAR].
2
Press [PRINT].
The equipment starts printing.
The job in progress can be monitored on the [JOBS] tab listing the Normal Print jobs ( P.178).
The printed job will be deleted from the Hold Print job list.
To Next Page
Loading...
