5.MANAGING PRINT JOBS FROM THE CONTROL PANEL
Monitoring the Print Job Status 201
5 MANAGING PRINT JOBS FROM THE CONTROL PANEL
9
Press [SETTINGS] and then select the setting items as required.
y To print a JPEG file, you can set [SIZE].
y To print a PDF file, you can set [FINISHING], [2-SIDED] and [PDF Overprint].
1) Press any of [SIZE], [FINISHING], [2-SIDED] and [PDF Overprint].
2) Select the desired item.
3) Press [OK] when you finish the setting.
y SIZE
Set the paper size.
y FINISHING
Set the position of stapling.
NON-STAPLE — Select this not to staple.
UPPER LEFT — Select this to staple at the upper left corner.
UPPER RIGHT — Select this to staple at the upper right corner.
To Next Page
Loading...
