Toshiba e-STUDIO400P - Page 73

2.PRINTING FROM WINDOWS
Setting Up Print Options 71
2 PRINTING FROM WINDOWS
Customization: [Plug-in] tab
You can enable or disable the Plug-in setting.
1) Paper Handling
Select this check box to enable the [Paper Handling] tab.
 P.43 “[Paper Handling] tab”
2) Image Quality
Select this check box to enable the [Image Quality] tab.
 P.48 “[Image Quality] tab”
3) Effect
Select this check box to enable the [Effect] tab.
 P.55 “[Effect] tab”
4) Templates
Select this check box to enable the [Templates] tab.
 P.74 “[Templates] tab”
5) Add Printer
Select this check box to enable [Add Printer] on the [Others] tab.
 P.61 “[Others] tab”
 P.65 “Add Printer”
6) Tandem Print
Select this check box to enable [Output Devices] on the [Others] tab.
 P.61 “[Others] tab”
 P.110 “Switching equipment to print jobs”
 P.111 “Splitting a print job across two pieces of equipment (Tandem Printing)”
7) [Restore Defaults]
Click this to restore the factory defaults on the [Plug-in] tab.
1
2
3
4
5
6
7