Turning ON/OFF
Turning ON/OFF
This section explains how to turn the power ON and OFF as well as the energy saving mode. This operation diers
between when the MAIN POWER lamp (green) on the control panel is lit and when it is not.
Turning ON
When the MAIN POWER lamp (green) on the control panel is o:
When the MAIN POWER lamp (green) on the control panel on:
The home screen is displayed when ready.
When turning OFF, you also need to shut down by pressing the [POWER] button on the control panel. Do
not simply turn the main power switch OFF. For details, see the following page:
& P.16 “Turning OFF”
Log in to the equipment if you are managing this equipment with the Department Management function or
User Management function.
& P.69 “Logging in”
•The equipment starts warming up. The
message is displayed to inform you that the
equipment is warming up. This may take longer
than normal depending on the status and
condition.
•While the equipment is warming up, you can
use the auto job start function. For details, see
the following guide:
& Copying Guide (PDF) : “Chapter 2: HOW TO
MAKE COPIES” - “Basic Copying Procedure”
Turn ON there.
Press the [POWER] button
To Next Page
Loading...
