8
Description of Components
This section describes the names and operations of the equipment.
1. Dual Scan Document Feeder
Scans both sides of the original one sheet at a
time.
& Specifications Guide (PDF) : “Chapter 2:
SPECIFICATIONS OF EQUIPMENT”
2. Operator’s Manual Pocket (back side)
Stores the manual.
3. USB terminal (4-pin)
Connects to a PC with a commercially available
USB cable.
4. Network interface connector
Connects to a network.
5. Duplexing unit cover
Open when paper misfeeds occur.
6. Bypass tray
For printing on special media types such as OHP
film.
& P.31 “Bypass copying”
7. Paper feed cover
Open to clear misfed paper.
8. Duplexing unit
Prints on both sides of the paper. Open when
paper misfeeds occur.
9. Paper size indicator
You can check the size of the paper set in the
drawer.
10. Drawer
Load paper in the drawer.
& P.18 “Placing Paper and Originals”
& Specifications Guide (PDF) : “Chapter 1:
SPECIFICATIONS OF PAPER”
11. Front cover
Open to change the toner cartridge and so on.
Front / Right side
Back side
3
4
11
10
9
1
2
8 6
5
7
12, 13
To Next Page
Loading...
